Steps

Step 1: Turn On Bluetooth

Ensure that you have Bluetooth turned on in the iOS settings app.

Step 2: Powering On and Pairing

Turn on the BT-105 by pressing the red power button and holding for 1 second. The LED will blink 3 times and attempt to pair with your iOS device. Your device may require validate to accept the pairing from the BT-105.

Step 3: Connected Status

The LED will blink orange rapidly when the BT-105 is connecting to your iOS device. Once connected, it will blink green once every 2 seconds.

Step 4: Reset Pairing

To reset pairing, press and hold the red button for 8 seconds until it blinks rapidly green and red alternately, then release.

Step 5: Unsuccessful Retry

If pairing is unsuccessful, delete the device displayed in the Settings app on your iOS home screen, reset the BT-105 again and try again. Initial discovery may take up to 30 seconds.

Step 6: Powering Off

Switch off the BT-105 by pressing the red button for 1 second until the LED turns red. Release and the LED will blink 3 times while the unit shuts down.